Skroutz.eu

Solid State Drive SSD 480GB 3.5 Inch with SATA III Connection
SSD Hard Drives

Solid State Drive SSD 480GB 3.5 Inch with SATA III Connection

The 480 GB HP P18432-B21 SSD uses MLC memory and a SATA III interface. It supports Hot-Plug, allowing it to be replaced without shutting down the system, and its firmware is digitally signed. HPE...

The 480 GB HP P18432-B21 SSD uses MLC memory and a SATA III interface. It supports Hot-Plug, allowing it to be replaced without shutting down the system, and its firmware is digitally signed. HPE Smart Carrier indicators make it easy to monitor its status, while the “Do Not Remove” button helps prevent data loss.

  • Capacity: 480 GB
  • Form factor: 3.5''
  • ...
See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
  • See all
1056 28 €
Delivery Fri, 13 Nov - Thu, 19 Nov
14,00 €   shipping cost
Sent from Greece
From Techstores 4.8 (100)
4.8 (100 reviews)
Greece
2 pieces
See Hard Drives on the page of Techstores

Learn more about invoicing
Review the product
Product report

Description

Description

The 480 GB HP P18432-B21 SSD uses MLC memory and a SATA III interface. It supports Hot-Plug, allowing it to be replaced without shutting down the system, and its firmware is digitally signed. HPE Smart Carrier indicators make it easy to monitor its status, while the “Do Not Remove” button helps prevent data loss.

  • Capacity: 480 GB
  • Form factor: 3.5''
  • Interface: SATA III
  • Cache type: DRAM-less
  • NAND flash type: MLC
  • Maximum read speed: 520 MB/s
  • Maximum write speed: 445 MB/s
  • 4 KB random read: 66,000 IOPS
  • 4 KB random write: 29,000 IOPS
  • Read latency: 125 µs
  • Write latency: 52 µs
  • Idle power consumption: 1.5 W
  • Maximum power consumption: 6 W
  • Power consumption during read: 2.94 W
  • Power consumption during write: 2.94 W
  • Weight: 0.26 kg
  • Dimensions: 228.6 x 177.8 x 127 mm
  • Certification: CE
  • Protection: Against humidity and extreme temperatures

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
480 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
MLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

MLC
Combines high performance and great durability. Today, it is found mainly in older or professional SSDs.

Dimensions

Form Factor
3.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

Performance

Maximum 4KB Random Write
29000 IOPS

Maximum 4KB Random Write

Indicative size for the maximum speed of the hard disk in data recording during general use, for example (opening the computer/using applications). The larger the size, the faster it is in these functions.

Average read speed for an SSD using the SATA III protocol is 80,000 IOPS, while for one with NVMe it is 380,000 IOPS.

These differences make sense in particularly demanding use (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The 480 GB HP P18432-B21 SSD uses MLC memory and a SATA III interface. It supports Hot-Plug, allowing it to be replaced without shutting down the system, and its firmware is digitally signed. HPE Smart Carrier indicators make it easy to monitor its status, while the “Do Not Remove” button helps prevent data loss.

  • Capacity: 480 GB
  • Form factor: 3.5''
  • Interface: SATA III
  • Cache type: DRAM-less
  • NAND flash type: MLC
  • Maximum read speed: 520 MB/s
  • Maximum write speed: 445 MB/s
  • 4 KB random read: 66,000 IOPS
  • 4 KB random write: 29,000 IOPS
  • Read latency: 125 µs
  • Write latency: 52 µs
  • Idle power consumption: 1.5 W
  • Maximum power consumption: 6 W
  • Power consumption during read: 2.94 W
  • Power consumption during write: 2.94 W
  • Weight: 0.26 kg
  • Dimensions: 228.6 x 177.8 x 127 mm
  • Certification: CE
  • Protection: Against humidity and extreme temperatures

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
480 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
MLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

MLC
Combines high performance and great durability. Today, it is found mainly in older or professional SSDs.

Dimensions

Form Factor
3.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

Performance

Maximum 4KB Random Write
29000 IOPS

Maximum 4KB Random Write

Indicative size for the maximum speed of the hard disk in data recording during general use, for example (opening the computer/using applications). The larger the size, the faster it is in these functions.

Average read speed for an SSD using the SATA III protocol is 80,000 IOPS, while for one with NVMe it is 380,000 IOPS.

These differences make sense in particularly demanding use (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.056,28 €
14,00 €   shipping cost
HP