Skroutz.eu

Hanna Water Photometer for Total Chlorine Measurement
Water Quality Meters

Hanna Water Photometer for Total Chlorine Measurement

The HI711 Total Chlorine Meter bridges the gap between simple chemical test kits and professional instruments.

See full description
Review the product
Product report

Description

Description

Characteristics

  • Range: 0.00 to 3.50 ppm (mg/L)
  • Resolution: 0.01 ppm (mg/L)
  • Accuracy at 25°C / 77°F 0.03 ppm 3% of reading
  • Light source: LED at 525nm
  • Light detector: Silicon photocell
  • Method: Adaptation of USEPA method 330.5, DPD method
  • Environment: 0 to 50°C (32 to 122°F). RH maximum 95% non-condensing
  • Battery type: (1) 1.5 AAA
  • Automatic shut-off: After 10 minutes of non-use
  • Dimensions: 81.5mm x 61mm x 37.5mm
  • Weight: 64 g

Includes

  • Total Chlorine Meter HI711
  • 2 sample cuvettes with caps
  • Total chlorine reagent starter kit for 6 tests (6 packets of reagent powder)
  • Battery
  • Instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Digital
Yes
Calibration Capability
No
ATC
No
Photometer Type
Total Chlorine

Measurement Capability

TDS
No

TDS

(Total Dissolved Solids) Measures the total amount of dissolved solid substances in water (e.g. salts, minerals, inorganic elements). The value is usually expressed in ppm (parts per million) or mg/L. It is used for a quick assessment of the water's purity and its content of dissolved elements.
EC
No

EC

Measures the electrical conductivity of water, that is, its ability to conduct electric current due to the presence of dissolved ions. The value is usually expressed in μS/cm or mS/cm and is used to monitor the concentration of salts and nutrients.
pH
No

pH

Measures the level of acidity or alkalinity of water on a scale from 0 to 14. Values below 7 indicate acidic water, a value of 7 is neutral, and values above 7 indicate alkaline water. It is used in applications such as aquariums, swimming pools, hydroponics, and water quality control.
Temperature
No

Temperature

Measures the water temperature, which significantly affects other quality measurements, such as pH, conductivity (EC), and dissolved oxygen.
ORP
No
Salinity
No
Hardness
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Characteristics

  • Range: 0.00 to 3.50 ppm (mg/L)
  • Resolution: 0.01 ppm (mg/L)
  • Accuracy at 25°C / 77°F 0.03 ppm 3% of reading
  • Light source: LED at 525nm
  • Light detector: Silicon photocell
  • Method: Adaptation of USEPA method 330.5, DPD method
  • Environment: 0 to 50°C (32 to 122°F). RH maximum 95% non-condensing
  • Battery type: (1) 1.5 AAA
  • Automatic shut-off: After 10 minutes of non-use
  • Dimensions: 81.5mm x 61mm x 37.5mm
  • Weight: 64 g

Includes

  • Total Chlorine Meter HI711
  • 2 sample cuvettes with caps
  • Total chlorine reagent starter kit for 6 tests (6 packets of reagent powder)
  • Battery
  • Instructions

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Digital
Yes
Calibration Capability
No
ATC
No
Photometer Type
Total Chlorine

Measurement Capability

TDS
No

TDS

(Total Dissolved Solids) Measures the total amount of dissolved solid substances in water (e.g. salts, minerals, inorganic elements). The value is usually expressed in ppm (parts per million) or mg/L. It is used for a quick assessment of the water's purity and its content of dissolved elements.
EC
No

EC

Measures the electrical conductivity of water, that is, its ability to conduct electric current due to the presence of dissolved ions. The value is usually expressed in μS/cm or mS/cm and is used to monitor the concentration of salts and nutrients.
pH
No

pH

Measures the level of acidity or alkalinity of water on a scale from 0 to 14. Values below 7 indicate acidic water, a value of 7 is neutral, and values above 7 indicate alkaline water. It is used in applications such as aquariums, swimming pools, hydroponics, and water quality control.
Temperature
No

Temperature

Measures the water temperature, which significantly affects other quality measurements, such as pH, conductivity (EC), and dissolved oxygen.
ORP
No
Salinity
No
Hardness
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

88,04 €
14,00 €   shipping cost