The instructions for use include the following steps:

• The surface must be clean, dry, and free from rust and grease.
• Absorbent surfaces should be primed.
• Cover areas that will not be painted.
• Before use, shake the spray well for 3 minutes.
• As needed, perform a test spray on an inconspicuous spot.
• Spray from a distance of 20 – 30 cm and apply several thin coats, with 2-minute intervals between coats.

Important: Applying a clear varnish will ruin the effect of the color. The only way to restore gloss is by applying a new layer of effect spray. Avoid spraying on surfaces already painted with synthetic resin varnishes.

Warning: Danger. Hazardous components: a reaction mixture of ethylbenzene and xylene.

Hazard statements:

• Extremely flammable aerosol.
• Pressurized container, may burst if heated.
• May cause drowsiness or dizziness.
• Causes skin and respiratory irritation.
• May cause damage to organs after prolonged or repeated exposure.
• Causes serious eye irritation.

Precautionary statements:

• If medical advice is needed, have the product container or label at hand.
• Keep away from children and sources of heat, sparks, and open flames.
• Do not spray near an open flame.
• Do not puncture or burn the container even after use.
• Avoid inhaling sprays and wear personal protective equipment for eyes/face.
• In case of skin contact, rinse with plenty of water and soap.
• Do not expose to temperatures exceeding 50°C.
• Dispose of contents/container according to local regulations.

Additional statements: Explosive mixtures may form in poorly ventilated areas.