Overall, I have connected 10 identical bulbs outdoors. The connection process is relatively simple.
You download the Eurolamp application (there are also other compatible ones), select what you want to connect, enter the password of your 2.4G network, blink the switch 3 times, and the application finds it. However, there is a possibility of failure, so the above process may need to be repeated.
Now, regarding the application and the capabilities of the bulb:
- You can create different spaces in your home, such as Living Room, Kitchen, etc.
The above will be in the HOME category and each space will have its own tab in the list of each bulb located in it. Of course, you can also have all the bulbs in one list.
- You can group them however you want. For example, each outdoor light has 2 such bulbs. So, to avoid controlling each one separately, I have grouped them in pairs. Then, I have made another grouping based on which space they are in.
- The application allows for automation if you have other connected devices. It follows the logic of If then else.
- It allows for programming. You can set specific times for the bulbs to turn on and off.
- You can adjust the bulb from warm to cool white.
- It has intensity levels from 0 to 100 in increments of one.
- RGB capabilities.
- It also has some preconfigured scenes, such as Night, Reading, Working, etc.
If there is a software upgrade for the bulb, the application will notify you and install it.
For a few months now, it has had one.
Out of the 10 I bought, 1 turned out to be faulty. Although I can turn it on through the application, it goes offline and I can no longer turn it off except through the switch. It comes back after an hour, but I have already bought another one for replacement.
One detail I discovered is that if there is a power outage, once it is restored, the default state is ON. So, all the bulbs will turn on. I haven't found a way to change this yet, but I don't think it's possible. The reason is that it receives the command from the switch to turn off and then turn on, which makes it turn on, which is perfectly logical.
Overall, considering the price, it is a worthwhile choice!
Update after one year:
The above still holds true and I have already purchased additional ones for other areas of the house.
Just a note that they are quite sensitive to WiFi signal. Most of the problems they have occur when the signal is weak.
However, be careful because their antenna is small and inside their body. The signal that may be considered okay for a mobile phone can cause issues with the bulb. For example, at a signal strength of around -70dBm, the bulb sometimes does not respond to commands.
Συνολικά έχω συνδέσει 10 ίδιες λάμπες σε εξωτερικό χώρο. Η διαδικασία σύνδεσης είναι σχετικά απλή.
Κατεβάζεις την εφαρμογή της Eurolamp (υπάρχουν και άλλες βέβαια συμβατές), επιλέγεις τι θες να συνδέσεις, εισάγεις το password του 2.4G δικτύου σου, αναβοσβήνεις τον διακόπτη 3 φορές και η εφαρμογή την βρίσκει. Υπάρχει βέβαια και η πιθανότητα αστοχίας οπότε θα πρέπει να επαναληφθεί η παραπάνω διαδικασία.
Τώρα, στα της εφαρμογής και δυνατότητες της λάμπας:
- Μπορείς να δημιουργήσεις διαφορετικούς χώρους στο σπίτι, π.χ Σαλόνι, Κουζίνα κτλ.
Τα παραπάνω πλέον θα είναι στην κατηγορία HOME και σε tab ο κάθε χώρος τη λίστα κάθε λάμπας που βρίσκεται σε αυτόν. Μπορείς βέβαια να έχεις και όλες την λάμπες σε μία λίστα.
- Μπορείς να κάνεις ό,τι ομαδοποίηση θες. Για παράδειγμα, το κάθε εξωτερικό φωτιστικό έχει 2 τέτοιες λάμπες. Οπότε, για να μην πρέπει να ελέγχω την κάθε μία ξεχωριστά, έχω κάνει ομαδοποίηση των 2. Έπειτα, έχω κάνει και μία ομαδοποίηση ανάλογα με το σε ποιόν χώρο αυτές είναι.
- Η εφαρμογή δίνει τη δυνατότητα αυτοματισμών, εάν έχεις και άλλες συσκευές συνδεδεμένες. Είναι της λογικής If then else.
- Δίνει τη δυνατότητα προγραμματισμού. Να ανάψουν και να σβησουν συγκεκριμένες ώρες.
- Μπορείς να ρυθμίσεις τη λάμπα από θερμό μέχρι ψυχρό λευκό.
- Έχει ένταση απο 0 μέχρι 100 σε βήματα του ενός.
- RGB δυνατότητες.
- Έχει και κάποια preconfigured scenes, όπως Night, Reading, Working etc
Έαν υπάρχει αναβάθμιση στο λογισμικό της λάμπας, η εφαρμογή θα σε ειδοποιήσει και θα την εγκαταστήσει.
Εδώ και κάποιους μήνες, έχει κάνει μία.
Από τις 10 που αγόρασα, 1 βγήκε προβληματική. Παρόλο που μπορώ να την ανάψω μέσω της εφαρμογής, βγαίνει Offline και δεν μπορώ πλεόν να την κλείσω παρά μόνο από τον διακόπτη. Επανέρχεται μετά απο ώρα αλλά ήδη αγόρασα άλλη για αντικατάσταση.
Μία λεπτομέρεια που ανακάλυψα είναι πως εάν υπάρχει γενική διακοπή ρεύματος, μόλις αυτο επανέλθει, το default state είναι ON. Όπότε όλες οι λάμπες θα ανάψουν. Δεν έχω βρεί ακόμα τρόπο να το αλλάξω αυτό αλλά δε νομίζω να γίνεται. Ο λόγος είναι πως παίρνει την εντολή απο τον διακόπτη να σβήσει και μετά να ανάψει, κάτι που την κάνει και να ανάψει, που είναι απολύτως λογικό.
Γενικά και για την τιμή της είναι μία αξιόλογη επιλογή!
Update μετά απο έναν χρόνο:
Τα παραπάνω ισχύουν ακόμα και έχω ήδη αγοράσει επιπλέον για άλλα σημεία του σπιτιού.
Μια παρατήρηση μόνο είναι ότι είναι αρκετά ευαίσθητες στο σήμα του WiFi. Τα περισσότερα προβλήματα που έχουν τα παρουσιάζουν όταν το σήμα είναι ασθενές.
Προσοχή όμως γιατί η κεραία τους είναι μικρή και μέσα στο σώμα τους. Το σήμα που μπορεί να θεωρείται οκ για το κινητό μπορεί να δημιουργήσει θέμα στη λάμπα. Για παράδειγμα, σε σήμα ~-70dBm η λάμπα κάποιες φορές δεν υπακούει στις εντολές.