Set of 5 SLIME vulcanizing tire patches (Dimensions 7x7cm)

Correct Usage:

• Remove any puncturing objects.
• Apply the rasp to the hole and slide it up and down to make it rougher and clean the inside of the hole.
• Remove the patch material from its protective cover and apply it to the tip of the needle.
• Apply it with the patch centered on the needle tip to the puncture until the patch reaches approximately 2/3 of the hole.
• Pull the needle straight out with a quick motion, do not twist it when pulling it out.
• Cut off the excess patch.
• Inflate the tire again to the recommended pressure and check for air leakage by applying a few drops of soapy water to the repaired area. If bubbles appear, repeat the process.

WARNING! This repair kit is for emergency tire repairs, so that vehicles can be driven to a repair center to make proper repairs to the tire. It is not intended for use on extensive tire damage.

Radial tires for passenger cars can only be repaired in the tread area. Repairs to the contour, side, or sidewalls of the tires are not allowed.

Exercise extreme caution when using tools to avoid injury. Wear safety glasses when repairing tires.