White primer for special applications based on acrylic resins and low VOC content, for both interior and exterior use. It has excellent adhesion and penetration on new surfaces such as plaster, cement, and particle board, while it strengthens old surfaces with glue, lime, gypsum, flaking paints, etc. Ideal for priming already painted, distressed, and problematic surfaces. It has very good coverage and dries quickly.
Thinning: Up to 20% by volume with SMAL TOLUX WHITE SPIRIT thinner. Painting tools: brush, roller. Coverage: 8-10 m²/lt per coat depending on the surface. Drying: Touch dry in 1-2 hours. Recoatable after 3-5 hours. VOC Category: "Binding Primers". Type D. VOC limit value = 750gr/lt. Maximum VOC content ready to use product = 550 gr/lt. VOC or VOP: volatile organic compounds with a boiling point.
Shades: White. Application Conditions: Temperature 5-30°C and relative humidity lower than 80%. New surfaces should dry for 3-4 weeks before priming.
- APPLICATION INSTRUCTIONS:
- Surface preparation: Clean surfaces thoroughly from dust, oils, old paints, friable parts, mold residues, etc. Lightly sand.
- Application: Stir well before use. Apply SMALTOX mono in 1-2 coats.
- Tool cleaning: Keep tools "wet" in the container or tray. Clean them immediately with warm water and soap.
- Storage conditions: Store in a cool environment. Protect from frost and sun exposure.
DANGER: Flammable liquid and vapors. May cause drowsiness or dizziness. Prolonged exposure may cause skin dryness. Keep locked up. Read the label before use. Keep away from heat and other sources of ignition. Do not smoke.
- Product Number
- proion-astaria-upost-21147
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic
Quantity
- Mass Gaining
- 2.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.