GENERAL CHARACTERISTICS
New technology white water-based primer with acrylic resins, suitable for exterior and interior use. Increases coverage and reduces the necessary coats of the final paint, while achieving the ideal balance of absorption and light scattering.
- Very covering
- Easy to apply
- Dries quickly
- High performance
- Suitable for all water-soluble paints
SHADES
Available in white and can be tinted through the Vitex Coloring System into 3 shades: Yellow, Red, and Gray. It can also be tinted for shades derived from medium and white base.
PREPARATION
Surfaces must be clean, dry, and smooth. New surfaces are prepared with sandpaper and primed with Vitex's PreColor Primer.
APPLICATION
The product should be stirred well before use. Apply in one coat with a roller or brush without dilution or with an airless spray gun, diluting 5 - 10% with water. Do not apply at temperatures below 5oC or above 35oC.
TECHNICAL CHARACTERISTICS
- Viscosity: 95 ± 5 KU (ASTM D 562, 25o C)
- Density: 1.21 ± 0.02 Kg / L (ISO 2811)
STORAGE
Keep containers tightly closed in a shaded area away from sunlight at temperatures between 5oC - 38oC.
SAFETY INSTRUCTIONS
Read the label before use. For detailed instructions, consult the product's Safety Data Sheet.
Times and Performance
- Surface drying time: 30-60 min
- Water dilution rate: 0%
- Coverage: 10-12 m2/L
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.