Skroutz.eu

Lewitt Interviewer Δυναμικό Microphone Handmade for Vocals
Microphones

Lewitt Interviewer Δυναμικό Microphone Handmade for Vocals

Specifications

  • Type: Dynamic, moving coil
  • Polar Pattern: Omnidirectional
  • Sensitivity: 1.33 mV/Pa, -57.58 dBV/Pa
  • Impedance: 235 Ω
  • Nominal Load Impedance: 1000 Ω
  • Connector: Gold 3-pin XLR
  • Microphone...

Specifications

  • Type: Dynamic, moving coil
  • Polar Pattern: Omnidirectional
  • Sensitivity: 1.33 mV/Pa, -57.58 dBV/Pa
  • Impedance: 235 Ω
  • Nominal Load Impedance: 1000 Ω
  • Connector: Gold 3-pin XLR
  • Microphone Dimensions: wire mesh φ - 36 mm | handle φ - 22 mm | total length - 272.7 mm
  • Net Weight of Microphone: 250 g
See full description See full description

  • Type (Directivity)

    Omnidirectional

    (Omnidirectional): Captures sound equally from all directions. Ideal for environmental recordings, interviews, and natural sound.
  • Usage Voice, Computer (Gaming & Streaming)
  • Placement Handmade
  • Connectivity XLR, 3 pin
  • See all
168 00 €
Delivery Mon, 10 Aug - Wed, 12 Aug
14,00 €   shipping cost
Sent from Greece
From Stollas 4.9 (30)
4.9 (30 reviews)
Greece
2 pieces
See Audio on the page of Stollas
Review the product
Product report

Description

Description

Specifications

  • Type: Dynamic, moving coil
  • Polar Pattern: Omnidirectional
  • Sensitivity: 1.33 mV/Pa, -57.58 dBV/Pa
  • Impedance: 235 Ω
  • Nominal Load Impedance: 1000 Ω
  • Connector: Gold 3-pin XLR
  • Microphone Dimensions: wire mesh φ - 36 mm | handle φ - 22 mm | total length - 272.7 mm
  • Net Weight of Microphone: 250 g

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Mode of Operation
Dynamic

Mode of Operation

Dynamic

Durable microphone that does not require power supply. Ideal for live performances and loud sound sources (vocals, drums, amplifiers).
Directivity
Omnidirectional

Directivity

Omnidirectional

(Omnidirectional): Captures sound equally from all directions. Ideal for environmental recordings, interviews, and natural sound.
Impendance
235 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Sensitivity
1.33 mV/Pa

Sensitivity

The sensitivity of a microphone indicates how strong the signal it produces is when recording a sound. It is measured in mV/Pa or dBV/Pa.

  • High sensitivity: The microphone can capture very low sounds, but it may be more sensitive to ambient noise.
  • Low sensitivity: It records louder sound sources without distortion, but requires more amplification from the preamp.

In general, condenser microphones have higher sensitivity than dynamic ones.

Connectivity
XLR, 3 pin

General Characteristics

Device Group
Voice, Computer (Gaming & Streaming)
Placement
Handmade
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Specifications

  • Type: Dynamic, moving coil
  • Polar Pattern: Omnidirectional
  • Sensitivity: 1.33 mV/Pa, -57.58 dBV/Pa
  • Impedance: 235 Ω
  • Nominal Load Impedance: 1000 Ω
  • Connector: Gold 3-pin XLR
  • Microphone Dimensions: wire mesh φ - 36 mm | handle φ - 22 mm | total length - 272.7 mm
  • Net Weight of Microphone: 250 g

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Mode of Operation
Dynamic

Mode of Operation

Dynamic

Durable microphone that does not require power supply. Ideal for live performances and loud sound sources (vocals, drums, amplifiers).
Directivity
Omnidirectional

Directivity

Omnidirectional

(Omnidirectional): Captures sound equally from all directions. Ideal for environmental recordings, interviews, and natural sound.
Impendance
235 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Sensitivity
1.33 mV/Pa

Sensitivity

The sensitivity of a microphone indicates how strong the signal it produces is when recording a sound. It is measured in mV/Pa or dBV/Pa.

  • High sensitivity: The microphone can capture very low sounds, but it may be more sensitive to ambient noise.
  • Low sensitivity: It records louder sound sources without distortion, but requires more amplification from the preamp.

In general, condenser microphones have higher sensitivity than dynamic ones.

Connectivity
XLR, 3 pin

General Characteristics

Device Group
Voice, Computer (Gaming & Streaming)
Placement
Handmade
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

168,00 €
14,00 €   shipping cost