Skroutz.eu

Proel LCH100AK Condenser (Small Diaphragm) Microphone Πέτου, Clip On for Vocals
Microphones

Proel LCH100AK Condenser (Small Diaphragm) Microphone Πέτου, Clip On for Vocals

Key features:

  • Type back electret Condenser
  • Polar pattern: Omni-Directional
  • Frequency response 80Hz - 16KHz
  • Sensitivity -52 + 3db
  • Impedance: 680 Ω
  • Maximum input: SPL 128db
  • Cable length: 1m
  • 3-pin mini XLR plug
See full description

  • Type (Directivity)

    Omnidirectional

    (Omnidirectional): Captures sound equally from all directions. Ideal for environmental recordings, interviews, and natural sound.
  • Usage Voice
  • Placement Lapel, Clip On
  • Connectivity XLR, mini XLR
  • See all
19 89 €
Delivery Wed, 12 Aug - Tue, 18 Aug
14,00 €   shipping cost
Sent from Greece
From Technosound 5.0 (41)
5.0 (41 reviews)
Greece
4 pieces
See Audio on the page of Technosound
Review the product
Product report

Specifications

Specifications

Dimensions

Mode of Operation
Condenser (Small Diaphragm)

Mode of Operation

Condenser (Small Diaphragm)
Very accurate and fast in response. Suitable for instruments with detail and high frequencies (acoustic guitar, piano, overheads).
Directivity
Omnidirectional

Directivity

Omnidirectional

(Omnidirectional): Captures sound equally from all directions. Ideal for environmental recordings, interviews, and natural sound.
Frequency
80 - 16000 Hz

Frequency

Indicates the frequency range that a microphone can capture and is expressed in Hertz (Hz). The more balanced the range, the more natural and clear the sound.

Usage examples:

  • 100 – 10,000 Hz to 200 – 12,000 Hz: Emphasis on speech intelligibility, with limited low and very high frequencies.
  • 50 – 14,000 Hz to 80 – 16,000 Hz: Balance of volume and clarity. Ideal for live performances and dynamic microphones.
  • 40 – 15,000 Hz to 50 – 18,000 Hz: Rich, natural vocal sound. Suitable for podcasts, radio, and streaming.
  • 20 – 18,000 Hz to 20 – 20,000 Hz: Full spectrum with high detail and "air". Ideal for studio recording.
  • Below 20 Hz & above 20,000 Hz: Extended technical range for specialized studio applications.
Impendance
680 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Max SPL
128 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Connectivity
XLR, mini XLR

General Characteristics

Device Group
Voice
Placement
Lapel, Clip On
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Specifications

Dimensions

Mode of Operation
Condenser (Small Diaphragm)

Mode of Operation

Condenser (Small Diaphragm)
Very accurate and fast in response. Suitable for instruments with detail and high frequencies (acoustic guitar, piano, overheads).
Directivity
Omnidirectional

Directivity

Omnidirectional

(Omnidirectional): Captures sound equally from all directions. Ideal for environmental recordings, interviews, and natural sound.
Frequency
80 - 16000 Hz

Frequency

Indicates the frequency range that a microphone can capture and is expressed in Hertz (Hz). The more balanced the range, the more natural and clear the sound.

Usage examples:

  • 100 – 10,000 Hz to 200 – 12,000 Hz: Emphasis on speech intelligibility, with limited low and very high frequencies.
  • 50 – 14,000 Hz to 80 – 16,000 Hz: Balance of volume and clarity. Ideal for live performances and dynamic microphones.
  • 40 – 15,000 Hz to 50 – 18,000 Hz: Rich, natural vocal sound. Suitable for podcasts, radio, and streaming.
  • 20 – 18,000 Hz to 20 – 20,000 Hz: Full spectrum with high detail and "air". Ideal for studio recording.
  • Below 20 Hz & above 20,000 Hz: Extended technical range for specialized studio applications.
Impendance
680 ohm

Impendance

Indicates how "easily" the microphone transmits its signal to the equipment (mixer, sound card, amplifier). It is expressed in Ohms (Ω).

  • Low impedance (≤ 600 Ω): Stable signal, less noise, ideal for professional equipment and long cable runs.
  • Medium impedance (600 – 1,000 Ω): Good balance, common in live and general use.
  • High impedance (> 1,000 Ω): More sensitive to loss and noise, usually found in older or specialized equipment.
Max SPL
128 dB

Max SPL

Max SPL (Maximum Sound Pressure Level) is the maximum sound pressure level (in dB) that a microphone can withstand before it starts to distort the sound.

  • High Max SPL (e.g., 140-160dB): Ideal for recording loud sources such as drums, amplified guitar, or live concerts.
  • Lower Max SPL (e.g., 120dB): Suitable for vocals and softer recordings.

The higher the Max SPL, the louder the sounds it can capture without distortion.
Connectivity
XLR, mini XLR

General Characteristics

Device Group
Voice
Placement
Lapel, Clip On
Vintage
No
Set
No
Color
Black

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

19,89 €
14,00 €   shipping cost