Skroutz.eu

Adeleq LED Strip 12V Cold White Light 5m Type SMD5050
LED Strips

Adeleq LED Strip 12V Cold White Light 5m Type SMD5050 Code: 30-3412200

White adhesive LED strip with a consumption of 7.2W/meter and 30LED/meter at 12VDC by Adeleq Lumen. It can be cut every 10 centimeters and extends up to 5 meters.

  • Available colors: warm, cool, red,...

White adhesive LED strip with a consumption of 7.2W/meter and 30LED/meter at 12VDC by Adeleq Lumen. It can be cut every 10 centimeters and extends up to 5 meters.

  • Available colors: warm, cool, red, yellow-orange, blue, green, and RGB
  • Requires a LED strip transformer - DC power supply (not included)
  • Operating ambient temperature: from -20°C to +35°C
  • Do not...
See full description See full description

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    12V

    The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    Cold White

    "Cool white is measured on the Kelvin scale with values ranging from 4200K to 6200K. The tones of cool white are whiter compared to natural light."
  • See all
Product report

Description

Description

White adhesive LED strip with a consumption of 7.2W/meter and 30LED/meter at 12VDC by Adeleq Lumen. It can be cut every 10 centimeters and extends up to 5 meters.

  • Available colors: warm, cool, red, yellow-orange, blue, green, and RGB
  • Requires a LED strip transformer - DC power supply (not included)
  • Operating ambient temperature: from -20°C to +35°C
  • Do not place near heat sources
  • Do not bend the strip at a right angle

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
30-3412200

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Cold White

Light Colour

Cold White

"Cool white is measured on the Kelvin scale with values ranging from 4200K to 6200K. The tones of cool white are whiter compared to natural light."
White Temperature
6200 K
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
USB
-

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
30 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
7.2 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No
Inch Compatibility
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

White adhesive LED strip with a consumption of 7.2W/meter and 30LED/meter at 12VDC by Adeleq Lumen. It can be cut every 10 centimeters and extends up to 5 meters.

  • Available colors: warm, cool, red, yellow-orange, blue, green, and RGB
  • Requires a LED strip transformer - DC power supply (not included)
  • Operating ambient temperature: from -20°C to +35°C
  • Do not place near heat sources
  • Do not bend the strip at a right angle

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
30-3412200

Dimensions

Length
5 m
Power Source
12V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

12V

The LED film requires a 12 volt power supply to operate. If the power supply is not included in the package, you will need to purchase it separately.
Light Colour
Cold White

Light Colour

Cold White

"Cool white is measured on the Kelvin scale with values ranging from 4200K to 6200K. The tones of cool white are whiter compared to natural light."
White Temperature
6200 K
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
USB
-

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
30 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
7.2 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
TV
No
Inch Compatibility
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
18,58 €
14,00 €   shipping cost