Skroutz.eu

Wisnetworks WIS-S5300 Access Point Wi‑Fi 4 Single Band (5GHz) for Outdoor Placement
Access Points

Wisnetworks WIS-S5300 Access Point Wi‑Fi 4 Single Band (5GHz) for Outdoor Placement

The WIS-S5300 is an outdoor wireless base with 2*2 MIMO technology based on OFDM and TDMA modulation. It features a flexible detachable antenna design with high performance and is ideal for long-range...

The WIS-S5300 is an outdoor wireless base with 2*2 MIMO technology based on OFDM and TDMA modulation. It features a flexible detachable antenna design with high performance and is ideal for long-range wireless network solutions. The innovative WiD TDMA technology allows more clients to access compared to traditional WiFi technology while significantly...

See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Single Band (5GHz)

    An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.

  • Wi-Fi Generation

    Wi‑Fi 4

    Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

    For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
  • See all
Review the product
Product report

Description

Description

The WIS-S5300 is an outdoor wireless base with 2*2 MIMO technology based on OFDM and TDMA modulation. It features a flexible detachable antenna design with high performance and is ideal for long-range wireless network solutions. The innovative WiD TDMA technology allows more clients to access compared to traditional WiFi technology while significantly improving network scalability in terms of throughput and latency. The detachable antenna design facilitates compatibility with Wisnetworks' external antennas.

  • The WiD TDMA technology enhances network scalability in terms of throughput and latency
  • Compatible with 802.11a/n, speeds up to 300Mbps
  • Easy collaboration with Wisnetworks sector/dish/omni antennas
  • Gigabit LAN port for maximum wireless performance
  • High transmission power and optimized receiving sensitivity
  • Easy installation and tilt adjustment with the provided mounting kits
  • Passive POE(24VDC) for flexible installation
  • Weather-resistant design with water cover kit
  • Protection up to 16kV ESD

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The WIS-S5300 is an outdoor wireless base with 2*2 MIMO technology based on OFDM and TDMA modulation. It features a flexible detachable antenna design with high performance and is ideal for long-range wireless network solutions. The innovative WiD TDMA technology allows more clients to access compared to traditional WiFi technology while significantly improving network scalability in terms of throughput and latency. The detachable antenna design facilitates compatibility with Wisnetworks' external antennas.

  • The WiD TDMA technology enhances network scalability in terms of throughput and latency
  • Compatible with 802.11a/n, speeds up to 300Mbps
  • Easy collaboration with Wisnetworks sector/dish/omni antennas
  • Gigabit LAN port for maximum wireless performance
  • High transmission power and optimized receiving sensitivity
  • Easy installation and tilt adjustment with the provided mounting kits
  • Passive POE(24VDC) for flexible installation
  • Weather-resistant design with water cover kit
  • Protection up to 16kV ESD

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Single Band (5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Single Band (5GHz)
An Access Point that only connects to the 5GHz frequency provides higher data transmission speeds and less interference from other wireless networks compared to the 2.4GHz frequency. This is because the 5GHz frequency has a wider bandwidth and more available channels, allowing for greater parallel data transmission. Finally, it covers smaller areas compared to 2.4GHz.
Maximum WLAN Speed
300 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 4

Wi-Fi Generation

Wi‑Fi 4

Older Wi-Fi standard, significantly slower than Wi-Fi 5 and Wi-Fi 6. Recommended for use with few devices and for applications that do not require high speeds. 

For most users, it would be preferable to choose a Wi-Fi 5 or 6 device depending on their needs. Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Outdoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

82,13 €
14,00 €   shipping cost